Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 49)

Groups are saved to the following directory on your SD card:
\Native Instruments
\Maschine 2\Groups.
You can also save your whole Project, see Saving a Project .
7.2.5. Saving a Sound
Using the File menu you can save individual Sounds directly to the SD card. This procedure is also
useful if you want to transfer Sounds between MASCHINE+ and MASCHINE software.
To save a Sound on MASCHINE+:
1. Press FILE ( Save ).
2. Press Button 3 SAVE AS .
3. Turn Knob 1 to select Sound .
4. Turn Knob 2 to select the name of the Sound you want to save.
→ The pad relating to the selected Sound with light-up brightly.
5. Press Button 8 SAVE AS .
6. Enter a name for your Sound.
7. Press ENTER to save the Sound.
→ The Sound is now saved to the SD card.
Sounds are saved to the following directory on your SD card:
\Native Instruments
\Maschine 2\Sounds.
You can also save your whole Group including all of its Sounds, see Saving a Group .
7.2.6. Exporting Audio
Use Export Audio to export your complete arrangement as audio from the Song view, or render
individual Scenes or Sections as audio files in from the Ideas view.
Export Audio is available from the File page.
• In Ideas view, it is used to export individual Scenes, or all Scenes at once.
• In Song view, it is used to export your complete arrangement or individual Sections of the
arrangement depending on the Loop range.
The exact length of the exported audio file depends on the Loop Optimize setting (see description
below). Export Audio also contains options that allow you to select the source you want to export
such as the Master, Groups, or Sounds.
To export Ideas or a Song as audio :
1. Enter Ideas or Song mode by pressing IDEAS , then SHIFT .
→ This will determine if you are able to export ideas or your whole song.
2. Set the Loop Range to the region that you want to export.
WORKING WITH MASCHINE+
42