Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 19)

4.2. Connecting to Wi-Fi
Connecting MASCHINE+ to a network enables you to download content to your Library from your
Native Instruments account using your Native ID, connect to other devices using Ableton Link, and
perform system updates.
To connect MASCHINE+ to a Wi-Fi network:
1. Press SETTINGS .
2. Using the 4-D encoder, select Network .
3. Turn the 4-D encoder or Knob 8 to select the name of the network you want to connect. If the
name of the network you want to connect is not visible, press Button 7 ( REFRESH ).
4. Press Button 8 ( CONNECT ).
5. Select each letter of the password by pushing and turning the 4-D encoder, press it to enter a
letter.
6. Press ENTER to confirm your password.
→ MASCHINE+ is now connected to the selected network.
4.2.1. Disconnecting from Wi-Fi
It is possible to disconnect MASCHINE+ from the Wi-Fi network from the Settings page.
To disconnect MASCHINE+ from a Wi-Fi network:
1. Press SETTINGS .
2. Use the 4-D encoder to select Network .
3. Press Button 8 ( DISCONNECT ).
→ MASCHINE+ is now disconnected from the network
4.2.2. Using Airplane Mode
Airplane mode suspends the device's network signal transmission, effectively disabling the
network service. As the name suggests, this mode is for use in environments where you are not
allowed to use Wi-Fi.
To enable or disable Airplane mode:
1. Press SETTINGS .
2. Use the 4-D encoder to select Network .
3. Turn Knob 1 ( Enabled ) to enable/disable Airplane mode.
→ Wi-Fi network service is suspended when Enabled is set to On .
4.3. Syncing MASCHINE+ using Ableton Link
Ableton Link is a protocol that synchronizes beat, phase, and tempo of Link-enabled applications
on the same computer, or over a shared network. This means you can conveniently keep
applications synchronized across different devices or join a group jam with others with minimal
setup. Connecting applications via Link provides you with the ability to synchronize them to a
shared timeline and change the tempo globally from each of the connected applications.
CONNECTING MASCHINE+
12