Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 147)

12.2.8. Repositioning a Clip
In the Song view, a Clip can be moved to a different position within the same Group. This enables
you to place a Clip exactly where you like on the timeline.
To reposition a Clip on the Arranger:
1. Hold SHIFT + IDEAS ( Song ).
2. Then press Button 2 ( SONG ) to select the Song view.
3. Press Button 2 ( CLIPS ) to select Clips.
4. Use the Page button to select the clip you want to adjust.
5. Turn Knob 1 to reposition the selected Clip.
→ The Clip is moved to the selected position.
To reposition a Clip in Clip view:
1. Press SHIFT + PATTERN .
2. Release SHIFT .
3. If necessary, press the left Page button to access page 1.
4. Turn Knob 1.
→ The Clip is moved to the selected position.
When you move a Clip, it snaps to the nearest position using the current Arrange Grid
value. To access the Arrange Grid, press SHIFT + FOLLOW ( Grid ), then press Button 3. You
can also override the Arrange Grid and adjust the Clip in smaller intervals by holding down
SHIFT while repositioning the Clip.
12.2.9. Inserting Scenes to an Arrangement as Clips
Once you are satisfied with a Scene you can insert it directly as Clips to your arrangement in the
Song view.
To insert a Scene to the arrangement as Clips:
1. Hold SHIFT + IDEAS ( Song ).
2. Then press Button 1 ( IDEAS ) to enter Ideas view.
3. Press and hold SCENE ( Section ) to enter Scene mode.
4. Press Button 3 ( APPEND ).
5. Press the pad corresponding to the Scene you want to append. You can do this more than
once, tapping a series of pads will add all of those Scenes into Sections at the end of the
Arranger in one quick step.
WORKING WITH PATTERNS AND CLIPS
140