Minor scales, Available chords – Native Instruments MASCHINE+ Standalone Production and Performance Instrument User Manual
Page 124
![background image](https://www.manualsdir.com/files/876293/content/doc124.png)
Minor Scales
Scale
Bank
Type
Degree Formula
Natural
Minor
Natural
1 2
♭
3 4 5
♭
6
♭
7
Dorian
Minor
Dorian
1 2
♭
3 4 5 6
♭
7
Phrygian
Minor
Phrygian
1
♭
2
♭
3 4 5
♭
6
♭
7
Minor Major
Minor
Min Maj
1 2
♭
3 4 5 6 7
Harmonic Minor
Minor
Har Min
1 2
♭
3 4 5
♭
6 7
Dbl Har Minor
Minor
Dbl Min
1 2
♭
3
♯
4 5
♭
6 7
Neapolitan Min
Minor
Nea Min
1
♭
2
♭
3 4 5
♭
6 7
Minor Locrian
Minor
Min Loc
1 2
♭
3 4
♭
5
♭
6
♭
7
Blues Min
Minor
Blues Mi
1
♭
3 4
♯
4 5
♭
7
Bebop Minor
Minor
Bebop Mi
1 2
♭
3 4 5
♭
6
♭
7 7
Hexa 1
Minor
Hexa 1
1 2
♭
3 5
♭
6
♭
7
Hexa 2
Minor
Hexa 2
1 2
♭
3 4 5 b6
Penta 1
Minor
Penta 1
1 2
♭
3 5 b6
Penta 2
Minor
Penta 2
1
♭
3 4 5
♭
7
Penta 3
Minor
Penta 3
1
♭
3 5
♭
6
♭
7
By default, the Chromatic scale is selected — in other terms, by default your pads play every
semitone, however, the last selected Scale is automatically assigned when a new Group is created.
The Scale Type parameter is not available if the Chord Mode parameter is set to Chord
Set.
Available Chords
The Chord engine can automatically generate chords depending on the pad you hit and possibly
the selected scale. The Chord engine is controlled via two parameters:
•
Chord Mode
(Off by default): Selects from three different modes for generating chords:
•
Off
: No chords will be generated. Only the notes corresponding to the pads that you hit will be
played.
•
Harmonizer
: Generates chords based on the pads you hit and using notes from the selected
scale, as specified by the Root Note and Scale Type parameters (see above). Use the Chord
Type parameter to choose the particular notes to be used in the chord (see below). As the
chord is triggered, pads of all included notes flash.
•
Chord Set
: This special mode maps a set of chords onto the first 12 pads. These chords are
not bound to any scale type, they are only affected by the selected Root Note. Use the Chord
Type parameter to choose a particular set of chords to be mapped onto the pads (see below).
In this mode, only the pad you actuate flashes.
RECORDING PATTERNS
117