Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 149)

Outgoing MIDI
You can also send MIDI data from Sounds . This enables you to record your performance on the
pads as a MIDI pattern on another device. This is described in section Sending MIDI from Sounds .
13.1.1. Sending MIDI from Sounds
Your Sounds can output MIDI notes and automation data to the outside world, allowing you to
control any MIDI-capable application and/or external MIDI gear from MASCHINE+.
With its MIDI output enabled, a Sound will send:
• MIDI notes corresponding to the notes played by that Sound in the current Pattern.
• MIDI notes corresponding to your hits on the pads.
• All events of the MIDI tracks you might have created in the MIDI Automation.
A Sound without any Plug-in loaded can still send the MIDI data listed above! Furthermore,
if the Sound has no Plug-in it will forward any incoming MIDI notes to its MIDI output. To
know how to configure the MIDI note input of Sounds, please refer to section Triggering
Sounds via MIDI Notes .
The MIDI output of Sounds is configured on the MIDI page of the Output properties for Sounds.
The MIDI page of the Output properties is available for Sounds only.
To access the MIDI Output page:
1. Press CHANNEL .
2. Press Button 3 ( SOUND ).
3. Use the 4-D encoder to select Output .
4. Press the right Page button to select page 3 MIDI .
→ The settings can now be adjusted using the Knobs.
The MIDI page of the Output properties for a Sound in the software.
The MIDI page of the Output properties for a Sound
Please refer to section Navigating Channel Properties, Plug-ins, and Parameter Pages to
learn how to access the MIDI page of the Output properties.
AUDIO ROUTING, REMOTE CONTROL, AND MACRO CONTROLS
142