Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 98)

– 98 –
Chapter 5 Basic Operations — Memory
[Next] Plays back the image when the [PLAY] button is pressed after the register memory is selected.
Setting details of event memory
You can specify the register memory target to recall more precisely.
The following figure shows the relationship between the setting target of [Register] and the setting target of [Detail Select].
f In the following figure, two types of lines show the types of items.
indicates an item to be selected in [Store]/[Recall] in the [Register] column.
indicates an item to be set in the [Detail Select] tab.
[ME1]
[DSK]
[AUX Sel1]: [All], [AUX1] - [AUX16]
[AUX Sel2]: [AUX1] - [AUX16]
[AUX Sel3]: [AUX1] - [AUX16]
[AUX Sel4]: [AUX1] - [AUX16]
[AUX Sel5]: [AUX1] - [AUX16] CBGD1
CBGD2
[XPT]
[AUX]
Key1 Key2 Key3 Key4
[Key XPT]
[A/B XPT]
[CBGD]
[Clip1]
[Clip]
[Clip2]
[Clip3]
[Clip4]
BKGD
BKGD
[BKGD]
[Key1] [Key2] [Key3] [Key4]
[ME2]
Key1 Key2 Key3 Key4
Key1 Key2 Key3 Key4
1
Select the button → [EVENT MEMORY] → [Detail Select] tab.
2
Select an item in [BKGD]/[Key1] to [Key4] in the [Detail ME] column.
[On] Sets as a memory target.
[Off] Does not set as a memory target.
3
Select an item in [A/B XPT]/[Key XPT] in the [Detail XPT] column.
[On] Sets as a memory target.
[Off] Does not set as a memory target.
4
Select an item in [Clip1] to [Clip4] in the [Detail Clip] column.
[On] Sets as a memory target.
[Off] Does not set as a memory target.
5
Select an item in [AUX Sel1] to [AUX Sel5] in the [Detail AUX] column.
f Select items from [AUX1] to [AUX16].
To select all AUX buses, select [All] in [AUX Sel1].
EMEM LINK function
Select the button in the transition area to execute a transition according to the pattern registered in the event memory. The next
transition operation by the fader lever or the / buttons becomes the operation of the event memory.
f Pause set using the mark is disabled.