Tone curve, Adjusting the gain of color matrix – Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) User Manual
Page 87
– 87 –
Chapter 5 Basic Operations — Color corrector
Tone curve
Correct the tone of input images.
Set the tone curve to adjust the screen brightness and contrast.
Adjust R, G, and B separately to adjust white balance or tone.
[Blue]
[Red]
[Green]
1: [Tone1 Black]
2: [Tone2 Gray L]
3: [Tone3 Gray H]
4: [Tone4 White]
1
Select the
→
[C/C IN 25‑30], [C/C IN 31‑32], [C/C OUT]
→
the tab to be set.
f
Select the tab to be set from the [SDI IN 25] tab to [SDI IN 32] tab, or the [SDI OUT 13] tab to [SDI OUT 16] tab.
2
Set [Red], [Green], and [Blue] in the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4 White] column.
[Tone1 Black]
Adjusts the black level.
[Tone2 Gray L]
Adjusts the gray Low level.
[Tone3 Gray H]
Adjusts the gray High level.
[Tone4 White]
Adjusts the white level.
3
Select an item in [RGB Link] in the [Tone1 Black] column.
[Off]
Enables setting of the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4 White] column independently from RGB.
[On]
Uses the value of [Red] as the values of [Green] and [Blue] for the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4
White] column.
@
@
NOTE
t
The unit simply connects the set black level, gray Low level, gray High level, and white level to create a tone curve. Depending on the setting values,
the tone curve might not be as desired.
Adjusting the gain of color matrix
1
Select the
→
[C/C IN 25‑30], [C/C IN 31‑32], [C/C OUT]
→
the tab to be set.
f
Select the tab to be set from the [SDI IN 25] tab to [SDI IN 32] tab, or the [SDI OUT 13] tab to [SDI OUT 16] tab.
2
Set [R‑G], [R‑B], [G‑R], [G‑B], [B‑R], and [B‑G] in the [Matrix R/G]/[Matrix B] column.
[R‑G]
Sets the gain value in the R-G axis direction.
[R‑B]
Sets the gain value in the R-B axis direction.
[G‑R]
Sets the gain value in the G-R axis direction.
[G‑B]
Sets the gain value in the G-B axis direction.
[B‑R]
Sets the gain value in the B-R axis direction.
[B‑G]
Sets the gain value in the B-G axis direction.