Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 110)

– 110 –
Chapter 5 Basic Operations — Video memory
[>Step] Moves one frame forward from the current frame.
[Trim In] Sets the current frame as the IN point of trimming.
[Trim Out] Sets the current frame as the OUT point of trimming.
[Trim In CLR] Releases the trimming settings of the IN point.
[Trim Out CLR] Releases the trimming settings of the OUT point.
@ @ NOTE
t When a moving image is saved to a memory card or a local computer, and when a moving image is saved to a project file, only the trimmed portion is
saved.
t When a moving image is saved in the register memory, the video before trimming and the trimming position are recorded.
t The same position cannot be specified for the IN point and the OUT point. The minimum unit for trimming is two frames.
Layout of display icons
Current icons
r Current icon of still image
Select the button on the top menu → [STILL] → [Still] tab, then the following icon is displayed at the top of the page. The icon is used for
channel selection.
2
1
1 Channel name
Displays channels from [Still1] to [Still4].
2 Source with key mark
Indicates a source with key. This mark is displayed only for sources with key.
r Current icon of moving image
Select the button on the top menu → [CLIP] → [Play Clip1] to [Play Clip4]/[Rec] tabs, then the following icon is displayed at the top of the page.
This icon is used for playback status display and channel selection.
2
3
4
1
6
7
8
9
5
1 Channel name
Displays channels from [Clip1] to [Clip4].
2 Thumbnail image
f The first frame image becomes the thumbnail image right after the image is recorded through the operation of the button on the top menu
→ [CLIP] → [Rec] tab → [Rec1] column.
f The first frame image becomes the thumbnail image when the image file is loaded from the button on the top menu → [CLIP] → [Register]
tab.
f The frame which is currently playing is updated as the thumbnail image when [Get Thumbnail] is selected from the button on the top menu
→ [CLIP] → [Play Clip1] to [Play Clip4] tab → [Edit] column.
3 Current frame
4 Recording time
Displays the recording time. If the clip has been trimmed, then the time from the IN point to the OUT point is displayed.
5 Source with audio data mark
Indicates this is a source with audio data.
This mark is displayed only for source with audio data.