Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 47)

– 47 –
Chapter 4 Preparations — Various settings
Various settings
Network settings
Configure the network for the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4 and the Main Frame AV‑HS60U1/AV‑HS60U2.
Configuring the network for the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4
Configure the network for the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4.
f The terminals connected to the Main Frame AV-HS60U1/AV-HS60U2 differ depending on the number of Control Panel AV-HS60C1/AV-HS60C2/
AV-HS60C4.
- When only one panel is connected
Connect the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 to the terminal of the Main Frame AV-HS60U1/AV-HS60U2. It is not
necessary to perform the network setting of the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4.
- When two or more panels are connected
Connect the first Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4 (main control panel) to the terminal of the Main Frame AV‑HS60U1/
AV-HS60U2.
Connect the second and subsequent Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 (sub control panel) to the terminal of the Main
Frame AV-HS60U1/AV-HS60U2. It is necessary to change the network setting of sub control panel before connecting.
f The default setting is as follows: IP address: 10.0.0.2, subnet mask: 255.255.255.248, IP address of the connecting Main Frame: 10.0.0.1, and default
gateway: 0.0.0.0
r AV‑HS60C1/AV‑HS60C2
BUS SHFT
BUS SHFT
Source display
B bus XPT button A bus XPT button button
button
Status display
button
button
button
r AV‑HS60C4
CHR LIN LUM FULL
MIX 02s01f MIX 01s00f MIX 01s00f WIPE 01s00f
CHR LIN FULL FULL WIPE
01s00f
MIX
01s00f
MIX
01s00f
MIX
01s00f
BUS SHFT
BUS SHFT
Source display
B bus XPT button A bus XPT button button
button
Status display
button
button
button
1
Turn off the power of the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4.