Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 108)

– 108 –
Chapter 5 Basic Operations — Video memory
Offset
(bytes)
Length
(bytes)
Header Description of setting Setting
8 2 X coordinate of image No restrictions ―
10 2 Y coordinate of image No restrictions ―
12 2 Width of image Varies depending on the image size. ―
14 2 Height of image Varies depending on the image size. ―
16 1 Color depth
24 bits 18H
32 bits 20H
17 1 Image descriptor No restrictions ―
r Specification of audio file
f Only the audio file that matches following specification can be used.
- Sampling frequency: 48 kHz
- Quantized: Linear PCM, 16 bits
- Number of channels: 2 channels
- WAV format (extension .wav)
f An audio data with silent data added to the end will be embedded to the clip file when the length of the audio data contained in the audio file is shorter
than the length of the image data.
f An audio data with end deleted will be embedded to the clip file when the length of the audio data contained in the audio file is longer than the length
of the image data.
Playing back moving images (Clip)
f Image data created using a computer can be loaded.
For details, refer to “Operating the register memory” (page 105).
f This operation can be also performed in the multi-selection panel area.
For details, refer to “Video memory menu” (page 43).
Playing back moving images
1
Select the button → [CLIP] → [Play Clip1] to [Play Clip4] tabs.
2
Select [Play] in the [Play1] column.
f Playback of the moving images starts.
f [Current Time] displays the current playback position (time).
f When [Pause] is selected, playback of moving images is suspended. To resume playback, select [Play].
3
Select [Stop] in the [Play1] column.
f Playback stops.
Moving to the first frame or last frame
1
Select the button → [CLIP] → [Play Clip1] to [Play Clip4] tabs.
2
Select [<>Last] in the [Play1] column.
[< Moves to the first frame.
[>>Last] Moves to the last frame.
Setting the playback mode
1
Select the button → [CLIP] → [Play Clip1] to [Play Clip4] tabs.
2
Select an item in [Link Target] in the [Play2] column.
f Set the link playback of Clip.
[Off] Does not perform link playback.
[Auto] Starts playback with the button in the transition area of ME set in [Link ME].
[KEY1] ‑ [KEY4]
Starts playback with the to buttons, and to buttons of the ME
set in [Link ME].
Starts playback only when the key corresponding to each button is off.
[Rec]
Playback starts if [Rec] is selected from the button on the top menu → [CLIP] → [Rec] tab → [Rec1] column.
Image data recorded in a different channel can be copied.
[Fader]
Links to the fader lever operation in the transition area of ME set in [Link ME], as well as the operation of the
button. In this case, the playback speed of Clip changes according to the fader lever operation or the transition period
from the operation of the button.
3
Select an item in [Link ME] in the [Play2] column.
f Select the ME where link playback of Clip is performed. Transitions can be executed using the fader lever or the button.
[ME1] Links with ME1 transition operation.