Setting date and time – Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) User Manual
Page 51
– 51 –
Chapter 4 Preparations — Various settings
f
Aside from [Tally Group1-1 (On-Air)]/[Tally Group1-2 (On-Air)], additional three tally groups can be set. When [Color] is selected, colors to be used
for the tally in the MultiView display can also be set.
Setting the parallel tally
1
Select the
→
[PERIPHERAL]
→
[GPI IN]/[GPI OUT] tab, and make the following settings.
[GPI IN] tab
Assigns Tally G1 DSBL through Tally G4 DSBL to externally control enabling/disabling of each tally group.
[GPI OUT] tab
Assigns source tally outputs by tally group.
Setting date and time
Set the date and time to be used as a timestamp when saving files to the memory card or the Storage Module AV‑HS60D1 (optional). It can also be
displayed on the split screen of the MultiView display.
1
Select the
→
[MAINTENANCE]
→
[Misc] tab.
2
Set the date and time in the [Date]/[Time]/[LTC] columns.
[Date] column
Sets the year, month, and date in [Year], [Month], and [Date].
[Time] column
Sets the hour, minute, and second in [Hour], [Minute], and [Second].
[LTC] column
Displays the information input to the