Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 91)

– 91 –
Chapter 5 Basic Operations — Memory
r Playback target (when playing back with the multi‑selection panel)
f Playback of [ME1] and [ME2]
The target selected at the start of playback is always played back.
- When the target selected at registration is either one of [ME1] or [ME2]
The target selected at registration is played back even when either [ME1] or [ME2] is selected at the start of playback.
- When there is no target selected at registration
[ME1] recorded at registration is played back even when either [ME1] or [ME2] is selected at the start of playback.
f Playback of [DSK], [AUX], and [CBGD]
The target selected by both operations at registration and the start of playback is played back.
r Playback target (when playing back with the menu panel)
f Playback of [ME1] and [ME2]
The target selected at the start of playback is always played back.
- When the target selected at registration is either one of [ME1] or [ME2]
The target selected at registration is played back even when either [ME1] or [ME2] is selected at the start of playback.
- When there is no target selected at registration
[ME1] recorded at registration is played back even when either [ME1] or [ME2] is selected at the start of playback.
f Playback of [DSK], [AUX], and [CBGD]
The target selected at the start of playback is always played back.
For the target which is not selected at registration, playback is performed with the setting at registration.
@ @ NOTE
t The selection button for the background wipe preset menu in the multi-selection panel will move to top left (pattern 1) when shot memory is played
back.
t Playback in selected mode is not possible for playback of [ME1] or [ME2] in the 3G mode or the 4K mode when the selection for playback is not
selected at the time of registration.
Editing register memories of the shot memory
Delete a registered register memory or change file names.
1
Select the button → [SHOT MEMORY] → [Register] tab.
2
Select [Misc] in the [Register] column.
f The [Misc] screen is displayed.
[Rename] Select [Rename] after selecting a file icon to change the file name using the on‑screen keyboard.
[Delete] Select [Delete] after selecting a file icon to delete the register memory.
[View]
Select the display mode.
[ALL]: Displays all the memory including the unregistered register memory.
[Exist]: Displays only the registered register memory.
[Page] Switches pages.
[Close] Closes the [Misc] screen.
Setting effect dissolve
Switching from the current image settings to the image settings stored in the shot memory can be performed smoothly.
1
Select the button → [SHOT MEMORY] → [Register] tab.
2
Select an item in [Effect Dissolve] in the [Mode] column.
f Set the effect when switching images.
[On] Switches the images using the dissolve effect.
[Off] Switches the images using the cut effect.
3
Set the time for dissolve effect in [Dissolve Time] in the [Mode] column.
4
Select an item in [Hue Path] in the [Mode] column.
f Select the effect when switching colors. The following Hue becomes the target.
- Colors of the color background
- Colors of the borders
- Colors of the edges
-
Colors of the fill matte
[Short] Changes the colors in the direction where the variation of Hue is small on the vectorscope.
[Long] Changes the colors in the direction where the variation of Hue is large on the vectorscope.
[CW] Changes the Hue clockwise on the vectorscope.
[CCW] Changes the Hue counterclockwise on the vectorscope.
[Step] Changes with the cut effect.