Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 64)

– 64 –
Chapter 5 Basic Operations — KEY
r Pattern examples for wipe transition
Pattern example 1 Pattern example 2 Pattern example 3 Pattern example 4
Key in
SQ
SQ
Key out
SQ
SQ
@ @ NOTE
t The // buttons are dedicated to the background transition.
r Wipe pattern screens for key transition
f The following wipe patterns are available only for [KEY1] and [KEY2].
- SQ: 31 to 46
- SL: 61 to 68
- 3D: 91 to 98
Setting the Multi Pattern effect
The wipe pattern can be divided to the specified number.
f Enabled when the following pattern waveform is selected.
- WIPE
1
Select the / button → [KEY1] to [KEY4] → [Modify] tab.
2
Set the specification method of the number of division in [H/V Sync] of the [Multi] column.
[On] Makes the number of division the same in horizontal and vertical directions.
[Off] Different number of division can be specified for horizontal and vertical directions.
3
Set the number of division in horizontal and vertical direction in [H] and [V] of the [Multi] column.
Setting the Modulation effect
An effect to ripple the wipe edge can be added.
f Enabled when the following pattern waveforms are selected.
- WIPE