Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 45)

– 45 –
Chapter 4 Preparations — Menu delegation function
Menu delegation function
When a button on the Control Panel is double-clicked, the menu screen displayed on the Menu Panel AV-HS60C3 or the multi-selection panel area can
be switched.
At the same time, the normal operation activated when the button is pressed is also executed.
Enabling/disabling the menu delegation function
Enable/disable the menu delegation function at the Menu Panel AV-HS60C3 and the multi-selection panel area separately.
1
Select the button → [CTRL PANEL] → [Main Panel]/[SubPanel1]/[SubPanel2] tab.
2
Select an item in [MenuPanel] or [Select Panel] in the [Delegation] column.
[On] button Enables the menu delegation function.
[Off] button Disables the menu delegation function.
Menu delegation function list
Button
Transition menu of the Menu Panel AV‑HS60C3
Transition menu of the multi‑
selection panel area Button position Operation target button
Crosspoint area
, ,
F/S>,
f When the key type is [Lum]/[Linear]/[Full]
The / button on the top menu
→ [KEY1] to
[KEY4] → [Key Setting] tab
f When the key type is [Chroma]
The / button on the top menu
→ [KEY1] to
[KEY4] → [Chroma] tab
f When PinP is enabled
The / button on the top menu
→ [KEY1] to
[KEY4] → [PinP Adjust] tab
―
The button on the top menu → [MACRO] → [XPT
Assign] tab
―
of A bus
The / button on the top menu → [IMAGE] →
[BKGD] tab → [A Effect1] column
―
of B bus
The / button on the top menu → [IMAGE] →
[BKGD] tab → [B Effect1] column
―
*, *
The button on the top menu → [CBGD] →
[CBGD1]/[CBGD2] tab → [Main Color] column
―
-
The button on the top menu → [DSK1] to
[DSK4] → [Setting] tab → [DSK Adjust] column
―
The button on the top menu → [STILL] → [Still] tab ―
Switches to the split display in which the image selected in the
DISP bus and the WFM/VECT are displayed.
―
- * The button on the top menu → [STILL] → [Still] tab
Selection of the register memories
([STILL1] to [STILL4])
- *
The button on the top menu → [CLIP] → [Play Clip1]
to [Play Clip4] tabs
Selection of the register memories
([CLIP1] to [CLIP4])
Transition area
-
The / button on the top menu → [KEY1] to
[KEY4] → [Transition] tab → [In Type] column
―
The / button on the top menu → [BKGD] →
[Transition] tab
―
The / button on the top menu → [BKGD] →
[Edge Border] tab
Selection of the BKGD WIPE
waveform
The button on the top menu → [EVENT MEMORY] →
[Register] tab
Selection of the event memories
The button on the top menu → [MACRO] → [Macro
Attach] screen
―
The / button on the top menu → [BKGD] →
[Position] tab → [Pattern Limit] column
―
The / button on the top menu → [BKGD] →
[Transition] tab
―
KEY operation area -
f When the key type is [Lum]/[Linear]/[Full]
The / button on the top menu
→ [KEY1] to
[KEY4] → [Key Setting] tab
f When the key type is [Chroma]
The / button on the top menu
→ [KEY1] to
[KEY4] → [Chroma] tab
f When PinP is enabled
The / button on the top menu
→ [KEY1] to
[KEY4] → [PinP Adjust] tab
―
DSK operation area -
The button on the top menu → [DSK1] to
[DSK4] → [Setting] tab
―