Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 24)

– 24 –
Chapter 3 Part Names and Functions — Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4
3 Source name display panels
Displays applications of the crosspoint buttons. The display settings of the source name display panels can be made from the button on the
top menu
→ [SOURCE NAME] → [Panel Name] tab. (page 132)
When operating other than macro bus: “crosspoint number” on the upper line, “input source name” on the lower line
When operating macro bus: “macro name” on the upper line, “input source name” on the lower line
4 PGM/A bus crosspoint buttons (AV‑HS60C1/AV‑HS60C2: 1 to 24, AV‑HS60C4: 1 to 16), PST/B bus crosspoint buttons (AV‑HS60C1/
AV‑HS60C2: 1 to 24, AV‑HS60C4: 1 to 16)
Selects the video signals of the PGM/A bus and PST/B bus.
Source can be selected using the <2nd PAGE>/<3rd PAGE> button. (AV-HS60C1/AV-HS60C2: Maximum of 96, AV-HS60C4: Maximum of 64)
(page 24)
f Bus mode can be selected from the button on the top menu → [OPERATE] → [Transition] tab → [Bus Mode] column → [Bus Mode].
(page 53)
5 button
Press the to / to /// to buttons while holding
down the button to switch the bus selection applications. For the to buttons, the bus selection applications
can be switched even when the selected button is pressed again.
Example) button
When only the button is pressed, the KEY bus crosspoint buttons are switched to the source selector buttons of the KEY1 fill bus.
When the button is pressed while the button is held down, the KEY bus crosspoint buttons are switched to the source
selector buttons of the KEY1 source bus.
6 <2nd PAGE>/<3rd PAGE> buttons
Switch the page to select the source with the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, or PST/B bus crosspoint buttons.
f The pages of the buses included in the corresponding ME can be switched at once. To switch pages at individual buses, assign the <2nd
PAGE>/<3rd PAGE> button to the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, and the PST/B bus crosspoint buttons. (page 131)
Button status
Displayed page
<2nd PAGE> button <3rd PAGE> button
Off Off First page
Lit Off Second page
Off Lit Third page
Lit Lit Fourth page
7 button
Enables/disables image effects (paint, mono colors, mosaics, defocusing, etc.) to be added to images selected at the PGM/A bus and PST/B bus.
f The setting to enable/disable image effects to be added to images selected in the KEY bus can be made from the / button on the top
menu
→ [IMAGE] → [Key1]/[Key2] tab → [Mosaic/Defocus] column. (page 85)
8 Bus tally
Indicates the output status of the buses. The buses that comprise the on-air tallies will light up.
Multi‑selection panel area
RECALL
STORE
DEL
4-1 4-3 4-2
4-4 4-6 4-5
4-7 4-9 4-8
OP STILL1
1
2
1 Mode selection button
Switches functions that can be operated on the multi-selection panel.
button Selects background wipe preset.
button Registers/recalls/deletes register memories of the shot memory.
button
Recalls register memories of the event memory. This button is also used to select register memories during EMEM-LINK
transition.
f Registration/editing are performed using the menu.
button
Records [CLIP1] through [CLIP4] (video memory) and [STILL1] through [STILL4] (still image memory) to the current
frame memories and plays them back.
f When using the Storage Module AV-HS60D1 (optional), register memories can be registered/recalled/deleted on SSD
installed in the Main Frame AV-HS60U1/AV-HS60U2.
button* Used as a plug-in software menu.
* This is a function to be supported in the future.
2 Multi‑selection menu panel
When the mode selection button is pressed, the menu to be displayed is switched.
For details, refer to “Basic operations for the multi-selection panel area” (page 40).