Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 92)

– 92 –
Chapter 5 Basic Operations — Memory
@ @ NOTE
t When [Effect Dissolve] in the [Mode] column is changed from [On] to [Off] during effect dissolve playback, the dissolve effect is cancelled and the
images are instantaneously switched to the images of the selected shot memory.
Setting the details of the shot memory
You can specify the register memory target to recall more precisely.
The following figure shows the relationship between the setting target of [Register] and the setting target of [Detail Select].
f In the following figure, two types of lines show the types of items.
indicates an item to be selected in [Store]/[Recall] in the [Register] column.
indicates an item to be set in the [Detail Select] tab.
[ME1]
[DSK]
[AUX Sel1]: [All], [AUX1] - [AUX16]
[AUX Sel2]: [AUX1] - [AUX16]
[AUX Sel3]: [AUX1] - [AUX16]
[AUX Sel4]: [AUX1] - [AUX16]
[AUX Sel5]: [AUX1] - [AUX16] CBGD1
CBGD2
[XPT]
[AUX]
Key1 Key2 Key3 Key4
[Key XPT]
[A/B XPT]
[CBGD]
BKGD
BKGD
[BKGD]
[Key1] [Key2] [Key3] [Key4]
[ME2]
Key1 Key2 Key3 Key4
Key1 Key2 Key3 Key4
1
Select the button → [SHOT MEMORY] → [Detail Select] tab.
2
Select an item in [BKGD]/[Key1] to [Key4] in the [Detail ME] column.
[On] Sets as a memory target.
[Off] Does not set as a memory target.
3
Select an item in [A/B XPT]/[Key XPT] in the [Detail XPT] column.
[On] Sets as a memory target.
[Off] Does not set as a memory target.
4
Select an item in [AUX Sel1] to [AUX Sel5] in the [Detail AUX] column.
f Select an item from [AUX1] to [AUX16].
To select all AUX buses, select [All] in [AUX Sel1].
Event memory
Register multiple image effects that can be registered in the shot memory as events. Smooth transitions can be achieved by playing back images
continuously while interpolating between events. A group of these events are referred to as an event memory.
Maximum 64 events can be registered in one event memory.
Event 1 Interpolation Interpolation event 2 Interpolation Event 3
Event memory
@ @ NOTE
t Use the Menu Panel AV-HS60C3 to register and edit events in the work memory, and save the created event memory in a register memory.