Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 20)

– 20 –
Chapter 3 Part Names and Functions — Main Frame AV‑HS60U1/AV‑HS60U2
Main Frame AV‑HS60U1/AV‑HS60U2
Front panel
1
2
3
Power supply 1
Power supply 2
1 Alarm indicator
Lights up when the cooling fan of the Main Frame AV-HS60U1/AV-HS60U2 has stopped or when there are problems (voltage declines) with the
power supply. In such cases, an alarm message is displayed on the Menu Panel AV-HS60C3. For the redundant power supply model (AV-HS60U2),
an alarm will be displayed if both switches of the power supply 1 and the power supply 2 have not turned on.
When an alarm has occurred, details of the problem can be checked from the button on the top menu
→ [MAINTENANCE] → [Alarm] tab.
(page 156)
Alarm status can be output from the alarm output port of the terminal on the Main Frame AV-HS60U1/AV-HS60U2 to external devices.
f AV-HS60U1 does not have the alarm indicator for the power supply 2.
2 Power indicator
Lights up when power is input into the / terminal and also when the switches of the power supply 1 and the power
supply 2 are set to .
f AV-HS60U1 does not have the power indicator for the power supply 2.
3 switch
Turns power on/off.
f The single power supply model (AV-HS60U1) does not have the switch for the power supply 2.
f When turning off the power of the redundant power supply model (AV-HS60U2), set both switches for the power supply 1 and the
power supply 2 to .
@ @ NOTE
t When an alarm has occurred, stop using the unit immediately, and be sure to contact your dealer.
Rear panel
1
3 4 5 6 7 8 9 10 11 12 14
2
13
1 to terminals (connector: BNC × 32/signal: SDI IN)
to terminals are equipped with color correctors.
The /// terminals are equipped with up-converters.
2 / terminals (connector: DVI‑D × 2/signal: DVI‑D IN)
Connects DVI-D output devices such as a computer using DVI-D cables.
f The DVI-I connector cable cannot be used.
3 to terminals (connector: BNC × 32/signal: SDI OUT)
Assigns SDI OUT signals from the button on the top menu → [SDI OUT] → [Assign] tab. (2 distributions each) (page 125)
to terminals are equipped with color correctors.
/ terminals are equipped with down-converters.
4 terminal (connector: RJ‑45/signal: 100Base‑TX)
Connects second and further Control Panels AV-HS60C1/AV-HS60C2/AV-HS60C4, menu operation computers, and external devices.
f Images from the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 connected to this terminal cannot be displayed on the Menu Panel
AV-HS60C3.