Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 113)

– 113 –
Chapter 5 Basic Operations — Project management
Project management
The settings of the unit can be saved or loaded in/from three types of storage.
f Memory card (optional) inserted in the memory card slot of the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 connected to the
terminal of the Main Frame AV-HS60U1/AV-HS60U2
f Storage Module AV-HS60D1 (optional) which can be mounted inside the Main Frame AV-HS60U1/AV-HS60U2
f Internal storage of the local computer connected to the terminal of the Main Frame AV-HS60U1/AV-HS60U2
@ @ NOTE
t To use a memory card in the unit, make sure to initialize the memory card using the unit. When the unit initializes the memory card, it formats the
memory card (in compliance with the SD standard) and creates a dedicated directory. (All files saved on the memory card will be erased.)
For details, refer to “Initializing a memory card” (page 115).
Saving data on a memory card or storage module
Save a project file in a memory card or the Storage Module AV‑HS60D1 (optional).
1
Select the button → [PROJECT] → [SD/SSD] tab.
2
Select an item in [Save] in the [SD]/[SSD] column.
f The [Save] screen is displayed.
3
Change the screen display as necessary.
[Sort] Sorts the file icon view in ascending or descending order by file number, file name, or date.
[View] Fixed to icon display.
[Cancel] Closes the [Save] screen.
4
Select the item to be stored.
[Setup]
f Current setting data
f Key source preset, background wipe preset
[SMEM]
f Register memory of shot memory (Max. 81)
f Key preset memory
[EMEM] Register memory of event memory (Max. 81)
[Macro] Register memory of macro memory (Max. 81)
[Still] Four channels of current frame memory
[Clip] Four channels of current frame memory
[Still Reg] 81 still images saved in the register memory area
5
Select [OK].
f The project file is saved in a memory card and the Storage Module AV‑HS60D1 (optional).
f A file name is assigned automatically. To change the file name, use the [Misc] screen after the registration.
f Up to 100 project files can be saved in the Storage Module AV‑HS60D1 (optional). The number of files that can be saved becomes less depending
on the item to be stored in memory. If a file cannot be saved, perform registration after deleting the file in the [MISC] screen.
Loading data from a memory card or the storage module
Load a project file saved in a memory card or the Storage Module AV‑HS60D1 (optional).
1
Select the button → [PROJECT] → [SD/SSD] tab.
2
Select an item in [Load] in the [SD]/[SSD] column.
f The [Load] screen is displayed.
3
Change the screen display as necessary.
[Sort] Sorts the file icon view in ascending or descending order by file number, file name, or date.
[View] Fixed to icon display.
[Cancel] Closes the [Load] screen.
4
Select the item to load.
f Items not saved in the project file are displayed as [OFF].
[Setup]*
f Current setting data
f Key source preset, background wipe preset
[SMEM]
f Register memory of shot memory (Max. 81)
f Key preset memory
[EMEM] Register memory of event memory (Max. 81)
[Macro] Register memory of macro memory (Max. 81)
[Still] Four channels of current frame memory
[Clip] Four channels of current frame memory