Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 172)

– 172 –
Chapter 10 External Interfaces — Plug‑in software
Plug‑in software
The unit allows plug-in software to be registered and functions to be added.
Plug-in software can be registered, deleted, or started through the button on the top menu
→ [PLUGIN Maint] → [Configuration]/[Load] tab.
f For detailed information regarding the plug-in software, consult your dealer.
1
Select the button → [PLUGIN Maint] → [Configuration]/[Load] tab.
2
Select an item in [Enable on boot] in the column which displays the name of the plug‑in to be set.
f Set whether to start the plug-in software when the unit is started up.
f The [Enable on boot] setting takes effect the next time the unit is started up.
[On] The plug-in software is started up when the unit is started up.
[Off] The plug-in software is not started up when the unit is started up.
3
Select an item in the column which displays the name of the plug‑in to be set.
[Version] Displays the plug-in software version.
[Delete]
Deletes the plug-in software from the internal memory.
f The corresponding plug-in software is deleted the next time the unit is started up.
[SD Load]
Loads the program from the memory card.
f By registering the plug‑in software, individual menu operation defined using the plug‑in software becomes available.
f When you have loaded plug-in software, turn off the power, and restart the unit.
[Local Load]
Loads the plug-in software saved in the computer.
f By registering the plug‑in software, individual menu operation defined using the plug‑in software becomes available.
f This function is available only in computers connected to the terminal.
f When you have loaded plug-in software, turn off the power, and restart the unit.