Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 56)

– 56 –
Chapter 5 Basic Operations — Wipe
[Off] Does not add the border effect.
[On] Adds the border effect.
3
Set [Width], [Soft], and [Fill] in the [Border] column.
[Width] Sets the border width.
[Soft] Sets the amount of soft effect.
[Fill]
Select the image to fill in the border area from [Matte], [UTIL1], or [UTIL2]. When [Matte] is selected, the border color can
be set using [Hue], [Sat], [Lum], or [Color Palette] in the [Border Color] column.
@ @ NOTE
t When [Border] in the [Border] column is set to [On], the amount of soft effect set using [Soft] in the [Border] column is indicated as the ratio of soft
effect to the border width. To add only soft effect to a wipe, set [Border] in the [Border] column to [Off].
t When a waveform other than [WIPE] is selected from the / button on the top menu → [BKGD] → [BKGD Pattern] tab, the color set in the
[Border Color] column is applied even if [UTIL1] or [UTIL2] is selected in [Fill].
t When the following waveforms are selected, a border is not applied even if [Border] in the [Border] column is set to [ON].
- SQ: 47, 48, 49, 50
Setting the border color
When [Matte] is selected in the [Fill] column, the border color can be set.
1
Select the / button → [BKGD] → [Edge Border] tab.
2
Adjust the color.
f Set [Hue], [Sat], [Lum], or [Color Palette] in the [Border Color] column.
Setting the background image
f Set the background image when the following pattern waveforms are selected.
- SQ: 47, 49, 51, 52, 53, 114
f The background image is output only when [4:3] or [4:3 Smooth] is selected on the top menu / button → [BKGD] → [Position] tab →
[Trim] column → [Trim] when SQ is set to 47 or 49.
1
Select the / button → [BKGD] → [Edge Border] tab.
2
Set [Base Video] in the [Base Video] column.
f Select an item from [Off] (black), [UTIL1], and [UTIL2].
Modifying wipe
Inside the screen
[Y-Pos]
[X-Pos]
Outside the screen
[100]
[50]
[0]
[ − 50]
[ − 50] [50]
[ − 100]
[ − 100] [0] [100]
1
Select the / button → [BKGD] → [Position] tab.
2
Select [Normal] or [Reverse] in the [Direction] column.
f This setting is linked with the / button. (page 25)
3
Select an item in [Normal/Reverse] in the [Direction] column.
f This setting is linked with the button. (page 25)
[On] Wipes in the direction of the setting item.
[Off] Does not wipe in the direction of the setting item.
4
Select an item in [Pattern Limit] in the [Pattern Limit] column.
f This setting is linked with the button.
[Off]
Does not restrict the amount of wipe transition for background transition. If the setting is changed from [On] to [Off],
transition is made according to the position of the fader lever at the time specified in [Return Time].
[On] Restricts the amount of wipe transition for background transition.
5
Set [Size] in the [Pattern Limit] column.