Yaskawa F7 Drive User Manual - Manual (Page 217)

Specifications C - 4
Common Specifications
Table C.2 480Vac Drive Specifications (Continued)
Model Number CIMR-F7U 4030 4037 4045 4055 4075 4090 4110 4132 4160 4185 4220 4300
Rated output capacity
(kVA)
46.0 57.0 69.0 85.0 110.0 140.0 160.0 200.0 230.0 280.0 315.0 450.0
Horsepower *2 40 50 60 75 100 125/150 - 200 250 300 350 500
Rated output current (A) 60.0 75.0 91.0 112.0 150.0 180.0 216.0 260.0 304.0 370.0 414.0 590.0
Overload capacity *3
(% of rated output current
for 60 sec) 150 150
*3
150
*3
Current limit (% of rated
output current)
150 150 *3 150 *3
Carrier frequency *5 2kHz
Maximum output
frequency
300.0Hz
Rated output capacity
(kVA)
51.0 59.0 73.0 95.0 120.0 140.0 180.0 200.0 230.0 315.0 390.0 510.0
Horsepower *2 40/50 60 75 100 125 150 200 - 250 300/350 400/450 500+
Rated output current (A) 67.2 77.0 96.0 125.0 156.0 180.0 240.0 260.0 304.0 414.0 515.0 675.0
Overload capacity *3
(% of rated output current
for 60 sec.) 107 117 114 108 115 120 108 120 120 107 118 120
Current limit (% of rated
output current)
120
Carrier frequency (kHz) *6 8 8 8 5 5 8 5 5 5 2 2 2
Maximum output
frequency
400.0Hz
Maximum output voltage 3-phase, 380, 400, 415, 440, 460 or 480Vac (Proportional to input voltage)
Rated voltage
Rated frequency
3-phase, 380, 400, 415, 440, 460, or 480Vac, 50/60Hz
Rated input current -
Heavy Duty *1 (A)
66 83 100 120 165 198 238 286 334 407 457 649
Rated input current -
Normal Duty *1 (A)
74 85 106 134 172 198 264 286 334 456 567 743
Allowable voltage fluctuation + 10%, - 15%
Allowable frequency
fluctuation
±5%
Measures for
power supply
harmonics
DC Reactor Built-in
12-Pulse
Rectification
Possible *4
*1 The difference between Heavy Duty ratings and the Normal Duty ratings for the Drive are the rated input and output current, overload capacity, carrier frequency, current limit, and
maximum output frequency. Parameter C6-01 must be set to value of “0” for Heavy Duty ratings and “2” for Normal Duty ratings. Factory default is Heavy Duty (C6-01=0).
*2 Horsepower ratings are based on 230V or 460V NEC Table 430.150. The maximum applicable motor output is given for a standard 4-pole motor. When selecting the actual motor
and Drive, be sure that the Drive's rated output current is appropriate for the motor's rated current.
*3 Model 2110 has an overload rating of 138% of rated output current for 60 seconds and a current limit rating of 138%. Models 4220 and 4300 have an overload rating of 150% of
rated output current for 45 seconds and a current limit rating of 150%.
*4 When setting the carrier frequency above the factory default, the Drive must be derated.
*5 Heavy Duty ratings for models 2110, 4220 and 4300 are effective in software version VSF103021 and higher.
*6 Each value shown is the Maximum carrier frequency and default carrier frequency.
*7 The carrier frequency for Heavy Duty is default to 2 kHz. Software version VSF103021 and higher may allow the carrier frequency to be increased above 2 kHz with a
reduction in continuous rated output current. Refer to C6-02 in Chapter 5 for further details.
O
u
tpu
t rat
ing
s
Heavy Du
ty
*
1
No
rm
al Du
ty
*
1
Power s
u
pp
ly c
h
ar
act
er
ist
ics
C
ont
ro
l c
h
arac
te
ri
st
ics
.