Detailed settings for codec – Grass Valley EDIUS Pro v.7.20 User Manual
Page 50
Project Settings
28
EDIUS - Reference Manual
3
•
Formats that can be exported with alpha channel retained when [Video Channel] is set to [YCbCr + Alpha] are
Grass Valley HQ AVI, Grass Valley HQX AVI and uncompressed (RGBA) AVI.
1
Note
• If a correct rendering format is not selected for the project settings, the item in [Render format] is displayed in red and
the setting cannot be completed.
Detailed Settings for Codec
You can configure the rendering quality for each codec in the [Project Settings] (Detailed Settings) dialog box.
[Project Settings] (Detailed Settings) Dialog Box
Grass Valley HQ AVI/Grass Valley HQX AVI/HQ MXF/HQX MXF
0
For the details of the items, see the [Settings - Grass Valley HQ]/[Settings - Grass Valley HQX] dialog box of [Preset
Wizard], by clicking [Hardware] in [System Settings]
→ [Device Preset]. Click [Save as default] to save the current
settings as defaults.
[Settings - Grass Valley HQ]/[Settings - Grass Valley HQX] Dialog Box
[Setup]
[Render format]
Select the default codec to be used for rendering and file export during edit-
ing. RGB, UYVY, YUY2, RGBA and v210 are uncompressed AVI.
For some codec, the rendering quality can be configured by clicking [Detail].
[Overscan Size]
Enter the ratio when you use overscan. The value range is between “0” and
“20”. If you do not use overscan, enter “0”.
[Audio reference level]
Set the audio reference level. If you switch the display of the [Audio Mixer]
dialog box to a VU meter, a scale with the specified audio reference level at
“0” is displayed.
[Resampling method]
Select a resampling method when transforming video with the layouter.
[Sequence setup (Default)]
Default settings for creating a sequence.
[TC preset]
Enter the start timecode of the timeline.
[TC Mode]
When NTSC has been selected for the project setting, select either drop
frame or non drop frame timecode display.
[Total length]
Set the length of the timeline by entering a number when the final total length
is fixed. When the project exceeds this length, the color of the timeline sec-
tion that is over the limit change.
[Track (Default)]
Default settings of a number of tracks and a channel map for creating new
projects or sequence.
[V Tracks]/[VA Tracks]/[T Tracks]/[A Tracks]
Set the number of tracks in which you place clips.
You can add or delete any tracks after opening a project.
[Channel map]
In the [Audio Channel Map] dialog box, configure the audio output channel of
each track.