Grass Valley EDIUS Pro v.7.20 - Manual (Page 108)

Edit Settings
86 EDIUS - Reference Manual
3 Set each item.
Once the display content of each monitor is set, no further setting is needed from the next time.
1
Note
• NVIDIA 3D VISION or Intel Intru 3D can be used only in D3D full screen mode.
It takes a while to display the stereoscopic video on the monitor.
• 3D VISION is applied only to the primary monitor.
4 Click [OK].
You can continue to set other items by clicking [Apply].
[On Screen Display]
Set display of the timecode and level meter on the status area.
1 Click [Settings] on the menu bar, and click [User Settings].
2 Click the [Preview] tree, and click [On Screen Display].
3 Set each item.
[No.] Enter the monitor number. Monitor numbers from “2” onwards are external
monitors.
[Full Screen Preview Contents] [Full Screen Preview Contents]
Displays content of the full screen view.
Click the list to display a menu and change display content for each monitor.
[No full screen preview]
Disable the full screen view.
[Player/Multicam Source]
Display the Player screen in full screen view. In the multicam mode, the vid-
eos of each track with camera assigned are displayed in full screen view.
[Recorder/Selected Camera]
Display the Recorder screen in full screen view. In the multicam mode, the
video of the selected camera is displayed in full screen view.
[Auto]
Display the same screen as video output in full screen view.
[Stereoscopic flip horizontal] Check this item to display video with the L side (for left eye) and R side (for
right eye) swapped.
[Using NVIDIA 3D VISION/Intel
InTru 3D] If your system supports NVIDIA 3D VISION or Intel Intru 3D, check this item
to enable the stereoscopic view ([L/R Dual Stream]) using NVIDIA 3D
VISION or Intel Intru 3D on the primary monitor.
[Monitor Check] Click this item to display the monitor number on the respective monitor.
[Show Normal Edit]/[Show Trim]/
[Show Export] Check the timecodes or information to display at each operation.
[View] [Position]
Click the display position inside the monitor on the status bar to select the
position.
[Size]
Select the font size of the status bar.
[Background]
Check this item to display the background on the status bar display area.
[Select Source Information] For captured clips, display information such as recording date. Select the
information to display from the list.