Grass Valley EDIUS Pro v.7.20 - Manual (Page 448)

Export of Edited Contents
426 EDIUS - Reference Manual
Example:
If [XDCAM EX] has been selected.
3
•
If [XDCAM EX 3D] has been selected as the exporter, the operations are subject to the following restrictions.
- If [Sony - SxS Memory Card] has been selected for [Destination], only memory cards in two slots on the L
side can be recognized on the PC due to the specifications of Sony memory camcorder. Insert memory cards
into the slots on the L side. After exporting, reinsert the cards into the slots on the R side.
- If the free space runs out on the export destination drive during an export operation, the [Select Memory Card
Drive] dialog box appears. However, when [Destination] is [Folder] or when batch export is being performed,
this dialog box does not appear.
- If [Folder] is selected for [Destination], the export destination for L and R cannot be set to the same location.
• When exporting has been performed by splitting up the export onto multiple SxS memory cards, the place
exported to will be registered in the bin as sequence clips. However, if one of the SxS memory cards is not
attached during registration, it will not be registered in the bin.
[Select Memory Card Drive] Dialog Box 0 P426
[Select Memory Card Drive] Dialog Box
0
Exporting to a GF Device
You can export a project to a GF device.
Connect the GF device to the PC, and check that the power is turned on.
Files can also be exported to the PC hard disk.
1 Click [GF] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
0 P412
2 Select an exporter, and click [Export].
Select either [GF clip], [GF clip(DV)], [GF clip(SD)], [GF clip(DVCPRO25)] or [GF clip(DVCPRO50)] as the exporter.
Exporters that do not support the project settings will not be displayed.
3 Set the export destination, BIN to export to, clip name, etc., and click [OK].
The configurable items will differ depending on the exporter.
[Destination] Select whether to export to an SxS memory card, to export to an SDHC
memory card or to save to a local folder.
If [Sony - SxS Memory Card] or [JVC - SDHC Memory Card] is selected,
select a card from the list.
If [Automatically select the next card when card is full.] is checked, when free
space runs out on the SxS memory card selected as the export destination,
an SxS memory card with free space will be selected automatically and
exported to. If it is unchecked, a dialog box will be displayed to select the
export destination.
If [Folder] has been selected, click [...] and specify a save destination.
[Segment Encode] Check this item to export a clip of a raw source without re-encoding. This
increases the output speed.
[ClosedGOP] Check this item to complete information within each GOP. Although the
amount of data increases, the video can be re-edited using software that sup-
ports GOP-based editing.
[Audio/Stereo] Check this item to export the audio as a stereo track. This is only displayed
when the audio channel is 2ch.
[Mode] Select an image quality mode (SP or HQ).
[Quality/Speed] Select quality from the list. The higher the quality, the more time it takes to be
encoded.
Metadata Add metadata such as title and comments to clips to be exported.
[Memory Card]: [L]/[R] Select the next memory card drive.
[OK] Click this item after selecting a drive or after replacing a memory card.