Project operations, Creating new project, Creating new project presets at initial start-up – Grass Valley EDIUS Pro v.7.20 User Manual
Page 47: Creating new project at start-up
25
Project Operations
EDIUS - Reference Manual
Project Operations
Creating New Project
This section explains how to create a new project when or after EDIUS starts.
To create a project, set a project format according to the format for the export destination, and register it as a project
preset.
Project presets are registered in advance, depending on the application. If this happens, select a project preset
according to the format for the export destination.
Creating New Project Presets at Initial Start-up
When you start up EDIUS for the first time after installation, configure the format of the project to create, and register it
as a preset.
1 Click [New Project] in the [Start Project] dialog box.
The [Create Project Presets] wizard will start up.
2 Check more than one item for [Size], [Frame Rate], [Bit] (in this order), and click [Next].
Configure the video size and frame rate, and video quantization for the project format to create with EDIUS. Multiple
check boxes can be selected for each item.
3
•
Set a video quantization bitrate to 10 bits to edit with 10 bit precision retained. However, it may turn out to be the
8 bit precision depending on the effects you use. The formats that can be imported with 10 bit precision are
Grass Valley, HQX AVI, uncompressed AVI, AVC-Intra, QuickTime, Grass Valley HQX MOV, and XAVC. The
formats that can be exported with 10 bit precision are Grass Valley HQX AVI, AVC-Intra and uncompressed
(v210) AVI.
3 Check the content.
A list of formats corresponding to the setting configured in step 2 is displayed.
A preset of the checked formats will be created. Uncheck the formats you do not use.
3
•
You can click [Back] to redo the settings.
4 Click [Completed].
The [Project Settings] (Simple Settings) dialog box appears, showing the created project preset as an icon in [Presets
List].
[Project Settings] (Simple Settings) Dialog Box
1
Note
• To change the project preset you created, perform through [Application] in [System Settings]
→ [Project Preset]. You
can create additional project presets in the system settings. Note that changes will not be reflected to presets if you
check [Customize] in the screen shown in step 4 and change the settings.
Creating New Project at Start-up
When EDIUS starts up, select a project preset and create a new project.
1 Click [New Project] in the [Start Project] dialog box.
The [Project Settings] (Simple Settings) dialog box appears.
[Project Settings] (Simple Settings) Dialog Box
3
•
The [Create Project Presets] wizard will start up.
Creating New Project Presets at Initial Start-up
2 Enter a project name in [Project name] of [Project file].
3 Select a project preset, and click [OK].
3
•
Click [Cancel] to return to the [Start Project] dialog box.