Grass Valley EDIUS Pro v.7.20 - Manual (Page 113)

91
[User Settings]
EDIUS - Reference Manual
[Select Operation] Dialog Box
0
How to Use the Behringer BCF2000
0
[Category] Select operation categories from the list to narrow down the items.
[Filter] Enter a keyword to narrow down the items.
Operation list Displays operations available for assignment. You can also assign operations
by dragging operations and dropping onto the buttons in the [Control] tab or
the list in the [List] tab.
[Use Key Repeat] Check this item to repeatedly perform an operation when a key is held down.
[Find Short Cut] Click this item and press any key on the keyboard to select the shortcut oper-
ation assigned to the key.
(1) Encoder knobs Encoder knobs can be used as buttons. Select the operation that is per-
formed when a button is pressed by the encode selection buttons. No func-
tions are assigned to the rotation direction of the encoder knobs.
(2) Upper buttons These buttons function as the SELECT button for selecting the learning
mode.
(3) Lower buttons These buttons are used for emulating touch operations. The touch sensor
part for the fader is emulated. Press a button to set a break state, and
release the button to set a release state.
(4) Encode selection
buttons Upper left: SELECT
Upper right: AUX
Lower left: SOLO
Lower right: MUTE
(5) Preset selection
buttons Select a preset No. To use this function from EDIUS, presets must be
installed.
(6) Function buttons These buttons can be customized with key assignments.
(1)
(2)
(3)
(4)
(5)
(6)