Exporting to an xdcam recorder or xdcam device, P 428 – Grass Valley EDIUS Pro v.7.20 User Manual
Page 450
Export of Edited Contents
428
EDIUS - Reference Manual
1
Note
• Make sure that the P2 device drivers are already installed.
• Audio will be exported in 16-bit format audio, even if the project preset is set to 24-bit format audio.
1 Click [P2] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
2 Select an exporter, and click [Export].
Select one of [P2 Clip], [HD P2 Clip] or [HD P2 3D Clip] as the exporter. Exporters that do not support the project
settings will not be displayed.
If a P2 card is not connected to the PC, the [Browse For Folder] dialog box will appear. Specify a file export destination
and click [OK].
3 Set the export destination, user clip name, codec, etc., and click [OK].
The setting items will differ depending on the exporter.
3
•
Metadata, such as the created by and capture information, can be imported from another P2 clip. Click [Load
Metadata] and select the XML file to be imported.
• If there is no more free space in the export destination, or if the clip consists of a file size that exceeds 4 GB, it
will be split up before export.
If [Automatically select the next card when card is full.] is checked, when the clip is split, a P2 card drive that has
free space will be selected automatically and exported to. If it is unchecked, when the clip is split, a dialog box
will appear to select the export destination.
• If exporting at 720p, the export frames must be even frames. If a confirmation message appears, select a
processing method.
• If a DVCPRO HD export format and the settings content for an EDIUS project preset differ, the export data will
be stretched before export so that the frame rate and the field order correspond to each other.
Exporting to an XDCAM Recorder or XDCAM Device
With the XDCAM exporter you can output a project as an MXF file, and upload it to an XDCAM device or FTP server.
MXF files can also be exported to the PC hard disk.
3
•
Files can also be exported to the XDCAM Memory drive (SxS memory card formatted with an XDCAM device).
• To export to an FTP server, have the connection destination set in advance in system settings.
1
Note
• Be sure to format the SxS memory card with an XDCAM device in advance.
• Files cannot be exported to an SxS memory card formatted in the XDCAM EX format.
• Proxy files will not be exported.
1 Click [XDCAM] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
2 Select an exporter, and click [Export].
Select from [XDCAM DV], [XDCAM HD], [XDCAM HD 422], [XDCAM HD 720P] or [XDCAM MPEG IMX] for the project
image size.
Exporters that do not support the project settings will not be displayed.
3 Set the export destination, clip name, etc., and click [OK].
The setting items will differ depending on the exporter.