Grass Valley EDIUS Pro v.7.20 - Manual (Page 379)

357
Checking Color Data
EDIUS - Reference Manual
Checking Color Data
Adjusting to Display on TV Monitor
The video finely displayed on a PC monitor may cause the problems like highlight/shadow detail loss when actually
displayed on a TV monitor.
This problem occurs when the luminance range is smaller than that allowed to be displayed on a PC monitor. To display
the video on a TV monitor, you need to adjust video signal in advance.
[Vector Scope/Waveform]
To adjust the video signal range that is hard to judge visually, measure it with Vector Scope/Waveform. Vector Scope
adjusts the color balance, and Waveform adjust the brightness to be the average value of the whole display.
1 Move the timeline cursor to display the image to check the color data on Recorder.
2 Click [Toggle Vector Scope/Waveform Display] of the timeline.
The [Vector Scope/Waveform] dialog box appears.
[Vector Scope/Waveform] Dialog Box
0 P357
2
Alternative
• Click [View] on the menu bar, and click [Vector Scope/Waveform].
1
Note
• Displaying Vector Scope/Waveform increases the CPU loading.Display it only when required.
[Vector Scope/Waveform] Dialog Box
0
(1) Information area Display coordinate values (X, Y) on the screen and YUV, IRE and RGB val-
ues.
(2) vector scope Display color distribution in the image shown in Recorder. The circle repre-
sents the color circle, and the distance from the center represents the satura-
tion Click on the vector scope to be expanded, and right-click it while keeping
expanded to be contrasted.
(1) (2) (3)
(4)
(5) (7) (8) (9) (10) (11) (12) (6)