Grass Valley EDIUS Pro v.7.20 - Manual (Page 322)

Editing Timelines
300 EDIUS - Reference Manual
Trimming Operation Methods 0 P262
• Place the mouse cursor on the Recorder with [Shift] on the keyboard held down, and rotate the mouse wheel. The
master at the position of the camera switch point being moved and the video of each track are displayed on the
Recorder. Check the video, and release [Shift] at the position to place the camera switch point to place the point at
the move destination.
3
•
If you have moved through other camera switch points, the camera switch points in between are deleted.
• Move the camera switch point set to the Out point of a clip to trim the clip.
Deleting Camera Switch Points
You can delete camera switch points.
1 Move the timeline cursor to a camera switch point to delete.
2 Right-click the time scale, and click [Add Cut Point/Clear Cut Point (Toggle)].
The camera switch point is deleted, and clips are merged. The enable/disable settings of clips when a camera switch
point is deleted are dependent on the previous clip.
The camera switch point cannot be deleted when the camera switch point set to the In and Out points of a clip which
has no margin.
2
Alternative
• Right-click the camera switch point to delete, and click [Add Cut Point/Clear Cut Point (Toggle)].
• Double-click the camera switch point.
3
•
To delete all camera switch points on the time scale, right-click the time scale, and click [Delete All Cut Points].
• To delete camera switch points between the In and Out points on the timeline, right-click the time scale, and click
[Delete Cut Points between In/Out].
Switching the Selected Camera
You can change the clips to acquire after setting the camera switch points.
The following explains operations in the divided screen in the multicam mode. When display of only the selected
camera in the single mode has been set, operate using the numerical keypad on the keyboard.
Multicam Editing by Shortcut Keys 0 P301
1 Move the timeline cursor on the clip to switch the selected camera while the timeline is stopped.
2 Click the camera video to set as the selected camera from among the camera videos of each track.
The clips of the selected camera are enabled, and others are disabled.