NavCom StarUtil-3000 Rev.G - Manual (Page 87)

StarUtil 3000 User Guide – Rev G
5-85
5. The software options file extension is *.opt. Each file includes the specific SF-3040 or SF-
3050 serial number in the file name, for example “SN123452”.
6. Select the software options file. The path to the file appears in the upload field
(see Figure 85).
7. Click . At the end of the upload, a confirmation box opens. Click OK.

The Input Terminal window also displays the outcome of the upload. Figure 86
shows a successful upload:
Figure 86 : Input Terminal – Successful Software Upload
8. Click (refresh) on the Software Options window (see Figure 87) to display the
uploaded software options.
Figure 87 : Software Options Window

“StarFire: Enabled” indicates that the StarFire Software Option is loaded. It does
not indicate that a StarFire License is installed. Refer to
Chapter 7/StarFire License Data for descriptions of the windows that provide
confirmation of an installed StarFire License.
9. Do not close StarUtil 3000. Perform one of these steps:

If a StarFire license is purchased, go to the How to Upload a StarFire License via Data
Cable section.

If a StarFire license is not purchased, go to How to Purchase Software Options.