NavCom StarUtil-3000 Rev.G - Manual (Page 66)

StarUtil 3000 User Guide – Rev G
3-64
Figure 61 : Version Command
4. Click the Send button. The receiver returns a list of the currently installed firmware.

The firmware is identified by version number. For example, the NAV firmware displayed in
Figure 62 is version 01.00.00.003.
Figure 62 : Example of Installed Firmware
5. Browse to NavCom\Firmware on the PC (refer to Figure 1).
6. The Firmware folder contains the most current firmware. The firmware file extension is
*.s19.
7. Compare the current NAV Firmware version in the Firmware folder with the installed version
displayed in the Input Terminal window (see Figure 63).

In the example below, the NAV firmware in the Firmware folder is more current than
the installed firmware. As a result, the user must update the NAV firmware in the
receiver.
Figure 63: Comparing Current & Installed Firmware
NAV Installed Firmware
Version
Old NAV Firmware Current NAV Firmware