NavCom StarUtil-3000 Rev.G - Manual (Page 37)

StarUtil 3000 User Guide – Rev G
1-35
StarFire QuickStart
StarFire QuickStart is a feature that eliminates the convergence period for StarFire-enabled
receivers. Sub-decimeter positioning is possible in < 5 minutes.
Refer to
Chapter 7 – StarFire QuickStart
Figure 23: StarFire QuickStart
Navigation Modes
Provides access to navigation mode settings
 Click the Retrieve Settings From the
Receiver button to retrieve the currently set
navigation modes.
 Click the ON or OFF radio buttons to set the
navigation modes, and then click Apply
Changes to the Receiver button.
Figure 24: Set Navigation Modes
Communication Window
The Communication window displays all scheduled messages (see Figure 25 ). The scrolling
scheduled messages indicate that a valid connection is established at the correct baud rate.