NavCom StarUtil-3000 Rev.G - Manual (Page 57)

StarUtil 3000 User Guide – Rev G
2-55
192.168.0.2,255.255.255.0,0.0.0.0
The PC IP address is set manually in Windows.
1. Connect the Positronic 9-Pin connector of the Ethernet cable (P/N 94-310265-3006LF) to
COM1 – LAN of the SF-3050. Connect the RJ45 plug end to the computer.
2. In Windows, right-click My Network Places and select Properties from the pop-up menu. The
Network Connections window opens.
3. Right-click Local Area Connection (or the equivalent) and click Properties from the
pop-up menu. The Local Area Connection dialog box opens.
4. Click Internet Protocol (TCP/IP). See Figure 49.
Figure 49: Local Area Connection
5. Click the Properties button. The Internet Protocol dialog box opens.
Refer to Figure 50 for the steps below:
6. Select Use the following IP address.
IP Address Network Mask Gateway