Request battery status (sf-3040), Figure 53: sf-3040 radio configuration and status – NavCom StarUtil-3000 Rev.G User Manual

Page 61

Text mode
Original mode

StarUtil 3000 User Guide

– Rev G

2-59



If this system is used with external Satel radios, the Satel radios must have the
FEC (forward error correction) feature set to Off and ‘Addressing’ must match the
SF-3040 network address.

Figure 53: SF-3040 Radio Configuration and Status

Request Battery Status (SF-3040)



For detailed instructions on charging and installing the SF-3040 battery packs, refer
to the SF-3040 GNSS Receiver Product User Guide, Chapter 6.

Refer to Figure 54 for the steps below:

This manual is related to the following products:

StarUtil-3000 Rev.D StarUtil-3000 Rev.C StarUtil 3000 Sapphire Rev.E StarUtil-3000 Rev.B