NavCom StarUtil-3000 Rev.G - Manual (Page 51)

StarUtil 3000 User Guide – Rev G
2-49
7. Double-click the Bluetooth serial port icon. An icon with green arrows is displayed, indicating
a connection is established between the Bluetooth Virtual COM port on the PC and the
Bluetooth dongle (see Figure 44).
Figure 44: Bluetooth Virtual COM Port Connection Established

If the PC requests a Bluetooth passcode, click OK. (There is no passcode for the
SF-3040 or the SF-3050 Bluetooth device; use the [BTSET] command on the Input
Terminal window to create a passcode in the receiver over the serial port if the
computer requires a passcode. Also see To use an input terminal to determine the
Bluetooth virtual COM port on a PC and connect to the receiver via Bluetooth, refer
to the BTSET command in the Sapphire Technical Reference Manual and to the
next section in this guide.

Configure Bluetooth via the Input Terminal , below.)

Not all Bluetooth devices are compatible with the SF-3040 or the SF-3050. Refer to
NavCom’s
Support/Troubleshooting Guides web page for additional information.
8. Double-click the Bluetooth Serial Port icon shown in Figure 44 to display the Bluetooth
Serial Port dialog box, which confirms the configured COM port (see Figure 45).