NavCom StarUtil-3000 Rev.G - Manual (Page 150)

StarUtil 3000 User Guide – Rev G
9-148
Solution Plot
Figure 139 : PVT Tab
– Solution Plot
Menu Options
Click the Menu button to view the display options for the Solution Plot window (see Figure 139 ).
The menu options are described below:
 Radius: Click to set the radius of the plot. The Set Radius window opens (see Figure 140 ).
The default radial distance is 2.0 m. Click the drop-down menu to select a new radial
distance.
Figure 140 : Solution Plot
– Set Radius

Origin: The origin is the center of the Solution Plot crosshairs.

Set Origin at Current Position: Plots the current position in the center of the Solution Plot
crosshairs.

Enter Origin Manually: Opens a dialog box (see Figure 141 ). Type in the known Latitude
and Longitude. Select DMS, Degrees, or DM from the drop-down list for Latitude and
Longitude. Select North or South for Latitude and East or West for Longitude. Select
Meters or Feet from the drop-down list for Ellipsoidal Height, and + or -. Click the OK
button. The origin is plotted from the entered values.