NavCom StarUtil-3000 Rev.G - Manual (Page 158)

StarUtil 3000 User Guide – Rev G
9-156
 [OUTPUT] NMEAGGA,ONTIME,2,2
Outputs GGA messages ONTIME at 5Hz on Port 2. The keyword mnemonic, ONTIME,
outputs the message at a rate

the purchased rate.
The DTM message will automatically appear in the output field at the same rate as the GGA
message as follows:
 [OUTPUT] NMEADTM,ONCHANGE,,2
The DTM message automatically displays at the same rate as the GGA. The keyword
mnemonic, ONCHANGE, outputs the message at the same rate set by the ONTIME
command.

Refer to the Sapphire Technical Reference Manual (TRM) for detailed information
on the output formats of NMEA messages and NavCom proprietary NMEA type
messages (see Related Documents in the fore-matter). In addition, refer to the
section, NMEA Messages Overview, in the TRM.

Click the word “Off” in the Rate column to display a drop-down arrow. Click the
arrow to display a drop-down list of Hz rates: 1 Hz, 5Hz,10Hz and Once. Select
from the list the Hz data rate you want (up to 10Hz) for that particular message.
Note that changes made here do not survive a power cycle.

Select the checkbox in the Paused column next to any message you want to
pause. When
“Paused,” the field does not update.

Click the heading of any column to sort the data.