NavCom StarUtil-3000 Rev.G - Manual (Page 106)

StarUtil 3000 User Guide – Rev G
6-104

If the profile loads successfully, the following confirmation message is displayed:

Click the OK button. The profile name is displayed in the PROFILE in use field at the
bottom of the Save/Load/Delete User Profile dialog box (see Figure 97).

If the file does not load successfully, there is no response. Confirm that the baud
rate is correct. Also, expand and scroll through the Input Terminal window to verify
that none of the parameters in the profile were rejected.
Edit User Profile
Figure 102: Edit Profile File
Refer to Figure 102 for the steps below:
1. Click next to the Profile File Name field to select a local user profile file (*.npt) on the PC
or flash drive. The path to the selected file appears in the Profile File Name field.
2. Click . A text editor opens displaying the contents of the user profile.
3. Edit the file contents as necessary and close.