Figure 74: progress [load firmware] dialog box, Figure 74) – NavCom StarUtil-3000 Rev.G User Manual

Page 73

Text mode
Original mode

StarUtil 3000 User Guide

– Rev G

3-71

8. Repeat the steps above to upload more firmware files.

Figure 74: Progress [Load Firmware] Dialog Box

Always cycle power to the receiver after a firmware update or a change to
Low Power settings. Failure to do so may result in the unit being unable to
track StarFire.

This manual is related to the following products:

StarUtil-3000 Rev.D StarUtil-3000 Rev.C StarUtil 3000 Sapphire Rev.E StarUtil-3000 Rev.B