NavCom StarUtil-3000 Rev.G - Manual (Page 39)

StarUtil 3000 User Guide – Rev G
1-37
entered via the Input Terminal are not saved to NVRAM through a receiver
power cycle. To maintain the new settings entered through the Input
Terminal, the current settings must be retrieved and saved as a new user
profile, or overwrite an existing profile before cycling receiver power.
Refer to Chapter 6 User Profiles/
Retrieve Current Receiver Settings and Save in Local File
, and be sure to select
the check box labeled Check to save current receiver settings.
Figure 27: Input Terminal

The Input Terminal provides confirmation of actions performed via the GUI, for
instance, the upload of the Software Options file. In the example shown in Figure
28: Input Terminal
– Confirmation, the file upload is successful.
Figure 28: Input Terminal
– Confirmation

The command [USEPROFILE] “NONE” resets all of the user-controlled
configuration parameters to the factory default values. The receiver’s profile
remains set to NONE until another profile is successfully input. Refer to
Chapter 6 for information about user profiles.
The profile NONE is subject to change.