NavCom StarUtil-3000 Rev.G - Manual (Page 167)

StarUtil 3000 User Guide – Rev G
11-165
1. Click the Simulation button on the Post Processing menu to open the Simulation dialog box
(see Figure 156).
2. Click to select a log file (*.dat) to play. The path to the file appears in the field.
The dialog box provides these controls:

Play

Stop

Update every 300 (default) milliseconds: Refresh rate of simulation
Almanac
The Almanac dialog box enables the user to download the ALM1B data set that describes the
current health and position of the GPS.
Figure 157: Almanac Dialog Box
1. Click the Almanac button on the Post Processing menu to open the Almanac dialog box.
2. Click to select a storage folder. The file path appears in the Filename field.
3. Select one of the following Options:
 Click Save ALM1B data in file to download the ALM1B data file from the receiver. Click the
Save button to save the file.
 Click Inject ALM1B data from file to upload an ALM1B data file from another source (e.g. e-
mail). Click the Inject button to complete the upload.