NavCom StarUtil-3000 Rev.G - Manual (Page 52)

StarUtil 3000 User Guide – Rev G
2-50
Figure 45: Bluetooth Virtual COM Port Connection Confirmed
9. To verify the assigned COM port, right-click the Bluetooth serial port icon (refer to Figure 43)
and select Properties on the pop-up menu (the Bluetooth Properties dialog box opens).
The window displays the Bluetooth Virtual COM port assigned to the Bluetooth dongle (see
Figure 46). Notate the COM port number for use in step 14 below.
Figure 46: Bluetooth Properties
10. Click OK on the Bluetooth Properties dialog box.
11. Open StarUtil 3000 on the PC.
12. Click the Connections button on the Shortcut Bar. The Port Configuration dialog box opens
(see Figure 47).

The Bluetooth module can be in either of two modes:

Command Mode – in this mode, the module receives commands (e.g., SETPIN,
DELPIN). Immediately upon powerup, Bluetooth is in Command mode. It has no active
connection. It can receive commands from any other port via an onboard processor
(Atmel).