Measurement Computing WaveBook rev.3.0 - Manual (Page 75)

WaveBook User’s Manual, ch03C 6-21-99 WBK Expansion Options, WBK16 3-43
To calibrate this load cell using the sensor calibration program:
1. First, enter the 5 necessary parameters into the calibration spreadsheet (see the figures below where the
load cell used in this example is connected to channel 1-1).
2. Once the parameters are entered into the spreadsheet, select Calibrated Enabled Channels either from
the menu bar or from the tool bar.
3. After the calibration is complete, the sensor calibration program will ask you if you want to save the
calibration data.
4. The calibration is now complete. To use the load cell, exit the WBK16 Sensor Calibration window and
return to the main WaveView Configuration main window.
Calibration Example, Two Views