Measurement Computing WaveBook rev.3.0 - Manual (Page 168)

A-6 Accessories, Specifications, & Abbreviations, 6-25-99 WaveBook User’s Manual
DBK30A - Specifications
Name/Function: Rechargeable Battery Module
Battery Type: Nickel-cadmium
Number of Battery Packs: 2
Battery Pack Configuration:
12 series-connected sub-C cells
Output Voltage: 14.4 V or 28.8 V (depending on the
selected mode)
Output Fuses: 2 A
Battery Amp-Hours: 3.4 A-hr (1.7 A-hr/pack)
Charge Termination: Peak detection
Charge Time: 2 hours
Charging Voltage from Supplied AC Adapter:
22 to 26 VDC @ 2 A
AC Adapter Input: 95 to 265 VAC @ 47 to 63 Hz
Size: 221 mm × 285 mm × 35 mm
(11" × 8-1/2" × 1-3/8")
Weight: 2.4 kg (6 lb)
DBK34 - Specifications
Name/Function: Vehicle UPS Module
Battery Type: Sealed-lead rechargeable
Number of Battery Packs: 2
Battery Pack Configuration: 6 series-connected D cells
Output Voltage: 12 V or 24 V (depending on jumpers)
Output Fuses: 8 A on each internal battery (2) Battery Capacity (Amp-Hours):
5 A-hr in 12 V mode (parallel)
2.5 A-hr in 24 V mode (series)
Operating Temperature: -20°F to 122°F (-29°C to 50°C)
Size: 8½ × 11 × 1¾ in. ( 216 × 279 × 44 mm)
Weight: 7.2 lb (3.27 kg)
WBK10/10H - Specifications
Name/Function: WBK10/10H 8-Channel Analog
Expansion Module
Number of Channels: 8 differential
Connector: BNC
Accuracy: ±0.025% FS
Offset: ±1 LSB max
Maximum Overvoltage: 30 VDC
Ranges: Unipolar/Bipolar operation is software selectable
via sequencer
Unipolar: 0 to +10 V, 0 to +5 V, 0 to +2 V, 0 to +1 V
Bipolar: -5 to +5 V, -2.5 to +2.5 V, -1 to +1 V,
-0.5 to +0.5 V
Input Current: 50 nA typ, 500 nA max
Input Impedance
Single-ended: 5 M
Ω in parallel 30 pF
Differential: 10 M Ω in parallel 30 pF
Gain Temperature Coefficient: 5 ppm/°C typ
Offset Temperature Coefficient: 12 uV/°C max
Sampling Rate: 1 MHz (1 µs)
Common mode rejection: >70 dB from 0 to 100 Hz
Power: 0.6 A max @ 15 VDC (7 to 12 Watts, typical)
Operating Temperature: 0 to 50°C
Storage Temperature: 0 to 70°C
Humidity: 0 to 95% RH, non-condensing
Dimensions: 220 mm wide × 285 mm long × 35 mm high
(8.5” × 11” × 1.375”)
Weight: 1.3 kg (2.8 lb)
WBK11 - Specifications
Name/Function: WBK11 8-Channel Simultaneous
Sample-and-Hold Card
Number of Channels: 8
Connectors: Internal to the WaveBook/512
(36-pin sockets mate with 36-pin connectors)
Accuracy: ±0.025% FS
Offset: ±1 LSB max
Aperture Uncertainty: 75 ps max
Voltage Droop: 0.1 mV/ms max
Maximum Signal Voltage: ±5.00 VDC (×1)
Input Voltage Ranges: Software programmable prior to a
scan sequence; expands WaveBook/512 ranges to:
Unipolar: 0 to +10 V, 0 to +5 V, 0 to +2 V, 0 to +1 V,
0 to +0.5 V, 0 to +0.2 V, 0 to +0.1 V
Bipolar: -5 to +5 V, -2.5 to +2.5 V, -1 to +1 V,
-0.5 to +0.5 V, -0.25 V to +0.25 V,-0.1 V to +0.1 V,
-0.05 to +0.05 V
Expands WaveBook/512H ranges to:
Unipolar: 0 to +10 V, 0 to +5 V, 0 to +2 V, 0 to +1 V,
0 to +0.5 V, 0 to +0.2 V
Bipolar: -10 to +10 V, -5 to +5 V, -2 to +2 V, -1 to +1 V,
-0.5 to +0.5 V, -0.2 to +0.2 V, -0.1 to +0.1 V
Programmable Gain Amplifier Gain Ranges:
×1, 2, 5, 10, 20, 50, 100
Weight: 0.14 kg (0.3 lb)