Measurement Computing WaveBook rev.3.0 - Manual (Page 50)

3-18 WBK16, WBK Expansion Options, ch03B 6-23-99 WaveBook User’s Manual
CHANNEL 1
R10
ch 2
ch 1 ch 2 ch 3 ch 4 ch 5 ch 6 ch 7 ch 8
ch 1
ch 4
ch 3
ch 6
ch 5 ch 7
ch 8
CHANNEL 2 CHANNEL 4
R5 R16 R13
CHANNEL 3
CHANNEL 6
CHANNEL 5
R18 R20
CHANNEL 8
R22 R23
CHANNEL 7
Front Panel - signal inputs from 8 channels
Rear Panel
Expansion
Signal In
BNC
Expansion
Signal Out
BNC DB15
Expansion
Control Out
DB15
Expansion
Control In
DIN5
Power
Out
DIN5
Power
In
ON/OFF
Switch
Fuse
Screw-terminal
Signal Plug
Status
LEDs
WBK15 Board Layout
Installation of 5B Modules
WARNING WARNING WARNING WARNING
Electric shock hazard! Turn off power to WBK15 and all connected modules and
devices before inserting or removing modules. Failure to do so could lead to injury or
death due to electric shock.
CAUTION CAUTION CAUTION CAUTION
Handle the 5B module carefully while inserting pins into the daughterboard. Do not
over-tighten mounting screw.
The 5B modules plug into a daughterboard (×2) on WBK15’s motherboard. Rubber bumpers on one side
and a tilted daughterboard allow the module to rest at a 5° angle to facilitate insertion and removal. The
adjacent daughterboard has a cut-a-way to allow room for a screwdriver (see figure).
5B Pins
(×14)
Mounting Screw
5°angle to
facilitate installation
Screwdriver
WBK15 Main Board
Daughterboard
Pin (×14)
Receptacles
Screw
Receptacle
5B Module
5B Module
Rubber Rest
5B Module Insertion/Removal