Measurement Computing WaveBook rev.3.0 - Manual (Page 111)

WaveBook User’s Manual, 6-24-99 WaveView 5-17
Scope Display
The following figure identifies features of the Scope display.
Scope Mode Indicators & Descriptions
Range Limits Shows a channel’s upper and lower range limit. Clicking on a range limit number
highlights the number, allowing you to enter a new value. After changing a limit, press
the enter key to make it take affect.
Individual Channel
Scaling
Adjusts the scaling of the individual channels so that the visible waveform fills 90% of the
graphs range.
Channel Select List
Box
Clicking on this cell will display the list of all channels selected in the WaveView
configuration menu. A maximum of 8 channels may be displayed at one time with the
remaining channels available through the scroll bar.
Amplitude Indicator Displays the amplitude at the point where the marker cross-hair intersects the waveform.
Moving the marker to different locations on the waveform changes the value of the
displayed voltage.
Time Indicator Displays the point on the acquisition time-line where the marker cross-hair intersects the
waveform. This value changes as the marker is moved along the X-axis (time scale).
Activity Indicator Displays a moving form to indicate the Scope feature is obtaining data.
Channel
Select
List Box
Amplitude
Indicator
Time
Indicator
Time of
Last Scan
in View Time of
First Scan
in View
Individual
Channel
Scaling
Range Limits
Range,
Lower Limit
Activity Indicator