Measurement Computing WaveBook rev.3.0 - Manual (Page 68)

3-36 WBK16, WBK Expansion Options, ch03C 6-21-99 WaveBook User’s Manual
Sensor Configuration Toolbar and Pull-Down Menus
Control functions in the sensor configuration window are available through the pull-down menus or the
toolbar. For descriptions of button functions, see the related menu selections. Note that some menu
selections have no corresponding button.
WBK16 Sensor Configuration Window Toolbar
1 – Load an Existing Configuration
2 – Save Current Configuration
3 – New Configuration
4 – Take a Single Reading
5 – Calibrate Enabled Channels
6 – Return to WaveView
File
The File menu provides four functions:
Load an Existing Configuration Load a saved sensor calibration configuration.
Save Current Configuration Save the current sensor calibration configuration for later recall.
New Configuration Set all parameters to their default startup setting.
Return to WaveView Exit the WBK16 Sensor Configuration window and return to WaveView.
Calibration
The Calibration menu provides two functions:
Take a Single Reading This command allows the user to take a single reading and display the values in
the WBK16 Sensor Configuration window.
Calibrate Enabled Channels This command will calibrate all enabled channels.
Password
The sensor calibration application provides password protection. If you calibrate any WBK16 channels and
then choose the password protection option, WaveView will prevent other users from making changes to
your calibration file. The Password menu provides three functions:
Enter Password Use this command to enter a previously selected password, enabling you to
change parameters.
Set a New Password This command allows the user to select a 4-7 character password. A message
box will prompt you to enter a new password. Type a password and press
“enter”, or click on the “OK” button.
Clear Password This command clears the password protection. A message box will prompt you
to enter the current password. Type the current password and press “enter”, or
click on the “OK button.