Hypertherm HyIntensity Fiber Laser Rev.3 - Manual (Page 33)

HyIntensity Fiber Laser Instruction Manual – 807090 Revision 3 1-1
Section 1
SPECIFICAtIONS
Fiber laser supply
Overview
The HyIntensity Fiber Laser (HFL) is a laser system based on all solid state components. The fiber laser supply contains
two to six laser engines and a beam combiner unit. Incoming electricity is converted to optical power by single emitter
based pump laser diodes in each engine, which is converted to a high brightness infrared (non-visible) laser beam.
Light from each of the laser engines enters the beam combiner unit which funnels the light into a single output fiber.
This configuration has a wall plug electrical to optical output power efficiency greater than 28%. All of the optical
components are water cooled to provide stable operation. A dehumidifier in the fiber laser supply maintains the humidity
level inside the cabinet enclosure.
Fiber laser supplies
Part number
Description
051041 HFL010 — 1.0 kW fiber laser supply, with the fiber coupling unit, 400-480 VAC, 50/60 Hz
051042 HFL010 — 1.0 kW fiber laser supply, without the fiber coupling unit, 400-480 VAC, 50/60 Hz
051023 HFL015 — 1.5 kW fiber laser supply, with the fiber coupling unit, 400-480 VAC, 50/60 Hz
051043 HFL015 — 1.5 kW fiber laser supply, without the fiber coupling unit, 400-480 VAC, 50/60 Hz
051039 HFL020 — 2.0 kW fiber laser supply, with the fiber coupling unit, 400-480 VAC, 50/60 Hz
051044 HFL020 — 2.0 kW fiber laser supply, without the fiber coupling unit, 400-480 VAC, 50/60 Hz
051048 HFL030 — 3.0 kW fiber laser supply, with the fiber coupling unit, 440-480 VAC 50/60 Hz
051053 HFL030 — 3.0 kW fiber laser supply, without the fiber coupling unit, 440-480 VAC 50/60 Hz
051049 HFL030 — 3.0 kW fiber laser supply, with the fiber coupling unit, 380-400 VAC 50/60 Hz
051052 HFL030 — 3.0 kW fiber laser supply, without the fiber coupling unit, 380-400 VAC 50/60 Hz