Hypertherm HyIntensity Fiber Laser Rev.3 - Manual (Page 14)

safety
S-4 H ypertherm Fiber Laser Instruction Manual – 807090 Revision 3
Laser safety
This product is a Class 4 laser capable of cutting metal. The Hypertherm HFL015 Fiber Laser is specifically designed
for incorporation or integration into other equipment. As such, it DOES NOT MEET the full requirements for a stand-
alone laser system as defined by 21 CFR 1040.10 and IEC/EN 60825-1. Within the EU, the equipment is supplied with
a Certificate of Incorporation indicating harmonized standards considered in the design.
“Machine builder” in this context is meant to include any person that integrates the Hypertherm HFL015 Fiber Laser into
their final laser cutting system, or any person who uses the Hypertherm HFL015 Fiber Laser in the form as supplied by
Hypertherm.
The label shown below has been affixed to the HFL015 Fiber Laser Supply, part number 051023 to satisfy the US Code
of Federal Regulations which indicates equipment does not need to comply with the requirements of 21CFR1040.10
and 21CFR1040.11 for a complete laser product, provided the equipment is labeled with a statement that it is
designated for use solely as a component.