Hypertherm HyIntensity Fiber Laser Rev.3 - Manual (Page 237)

HyIntensity Fiber Laser Instruction Manual – 807090 Revision 3 C-1
HFL Instruction Manual revision 3 changes (807090)
Changed
Page
Description of changes for revision 3 (date of revision - 10/2012)
Cover
Added information about the HFL030 so this manual now covers all of the Hypertherm HyIntensity
fiber lasers.
Universal
change
Beam delivery cable (BDO) was changed to beam delivery optical cable but it is still referred to as the
BDO.
S5 and S7 Added new wavelength output stickers for the HFL030 to the safety section.
PS-1 Through
ES-2
Added product and environmental stewardship information after the safety information.
Universal
change
The table of contents was removed from the first page of each section.
Specifications
Section
Re-arranged the information to group it more effectively.
1-2 Added part numbers for the HFL030 laser supplies.
1-3 Added the rated power output for the HFL030 laser supply.
1-4 Added a page with the HFL030 graphic and weight for the HFL030 laser supply.
1-8 Moved Chiller requirements to it’s own page (1-11).
1-10 Added caution about filtration requirements for oxygen and nitrogen supply gas lines.
1-11 Added caution saying that filtration for the cooling system must meet the chiller requirements.
2-11
Add information about the HFL030 and a note saying the graphic shows the HFL010, 015, 020
enclosure.
2-15 Add “(supplied by user and machine mounted)” next to “Red Stack Light.”
2-19
Updated the graphic at th etop of th epage showing the LHC mounted and tilted. Removed the top
brackets that ar enot availabl on the LHC.
2-30 and 2-31 Replaced photographs with line art for clarity.
2-32 Removed the last two steps and the photograph that went with them. The steps no longer apply.
2-36
Moved “2 Fiber laser supply to laser head” information to the next page (2-37). Reformated the push-
to-connect information so it fits the page better (no surrounding box).
2-38
Updated the text in the caution box to reflect the missing labels (water in/water out) on the new
collimators. Added a note about the new collimators above the caution box.
2-39
Replaced the photograph with line art and numbered the connections to correlate with the numbered
list on the previous page.
2-52 Corrected the silkscreen shown on the back of the gas console, above the air filter.
2-54
Added a note about the HFL030’s Phoenix software version requirement. The system needs version
9.72.3 or higher to function correctly.
2-55 Added HFL030 to step three.
3-18 Updated the information in the ”Cause” column for the “Door open” fault.
3-27, 3-31 and
3-35
Updated with a new screenshot
3-34 Added HFL030 information to the Digital beam enable diagram
3-40 to 3-49 Added “Optimizing fiber laser cut quality”
3-51 to 3-81 Updated existing cut charts as needed. Added HFL030 cut charts. Added brass and copper cut
charts for HFL020 and HFL030. Added